Asus A8V-VM - Manual (Page 69)

ASUS A8V-VM 2-2
2.5.5 APM Configuration
Power Management/APM [Enabled]
Power Button Mode [On/Off]
Restore on AC Power Loss [Power Off]
Advanced Resume Events Controls
Power On By Ring [Disabled]
Power On By OnBoardLan [Disabled]
Power On By PME# [Disabled]
Power On By KBC [Enabled]
Wake-Up Key [Any Key]
Power On By PS/2 Mouse [Disabled]
Power On By RTC Mouse [Disabled]
Power Management/APM [Enabled]
Enables or disables the Advanced Power Management feature.
Configuration options: [Disabled] [Enabled]
Power Button Mode[On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
Restore On AC Power Loss[Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state
whatever was the system state before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
The following items appear only when the Power Management/APM
feature is Enabled.
Power On By Ring [Disabled]
This allows either settings of [Enabled] [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]
Power On By OnBoardLan [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCILAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +VSB lead.
Configuration options: [Disabled] [Enabled]