Bosch Multigetränkesystem clear white anthrazit TAS4304 - Manual (Page 20)

22
Robert Bosch Hausgeräte GmbH
en
Controls!and!Displays
(please refer to the machine illustration at
the beginning of this instruction manual)
ON!/!OFF!switch!(1)
The ON / OFF switch is the main power
switch for the machine. You use it to turn
on your TASSIMO machine or turn it off
completely.
i Note:
Your TASSIMO machine automatically
switches to power­save mode. To save
even more electricity, we recommend
turning your TASSIMO machine off with
the ON / OFF switch after each use.
Start!/!Stop!button!(2)
The Start / Stop button is used to start
and interrupt the brewing, cleaning and
descaling processes.
Also you can add more water immediately
after the brewing process by pressing and
holding the Start / Stop button.
Status!LED! F (3a)
The Status LED indicates four machine
conditions:
– Steady orange:
Machine is ready (for example, if the
barcode was recognised)
– Blinking orange:
Machine is in the process of brewing
a drink / cleaning / descaling
– Steady red:
Error mode (for example, if the barcode
was not recognised)
– Dimmed, orange light:
Power save mode
¡ Risk!of!scalding!
Wait until the Status LED F has
stopped blinking before attempting to
open the brewing unit.
Fill!water!tank! T !(3b)
This indicator lights up when the removable
water tank (5) needs to be reilled or is not
in place.
Descale!required! Q !(3c)
This indicator lights up or blinks when your
TASSIMO machine must be descaled.
i Note:
Always descale your TASSIMO machine in
accordance with the instructions provided
under “Descaling” on page 28.
TAS43_EU.indb 22 21.12.2012 10:51:46