Bosch Multigetränkesystem clear white anthrazit TAS4304 User Manual

Page 30

Advertising
background image

32

Robert Bosch Hausgeräte GmbH

en

Problem

Possible!cause

Solution

The appliance does not

recognise the inserted

T DISC and remains in

stand­by mode or the

Status LED

F

lights up

red.

Appliance is not switched

on.

Make sure the appliance is

switched on before inserting a

T DISC.

No T DISC inserted.

Check if T DISC has been inserted.

The barcode could not be

detected.

Clean the T DISC barcode reading

window and try again or smooth

the barcode on the T DISC out with

your thumb.

Use another T DISC.

If problems persist contact the

TASSIMO careline.

The brewing system is

not properly closed.

Clean the brewing system

thoroughly, especially in the area of

the clamp.

The quality of the foam /

crema has deteriorated.

The drink outlet is

clogged or dirty.

Remove the drink outlet from the

brewing unit and detach the pierc­

ing unit. After cleaning everything

thoroughly, reassemble the parts

and replace them in the brewing

unit.

Clean the brewing unit with the

Service T DISC.

The appliance needs

descaling.

Descale the appliance (for details

see “Descaling”).

Brewing unit cannot be

securely closed.

T DISC Piercing unit

or T DISC holder is not

properly inserted.

Insert T DISC holder or T DISC

piercing unit properly.

The T DISC is not in­

serted properly.

Re­insert the T DISC and make

sure it is properly positioned.

The brewing unit is not

properly closed.

Push the handle down until it snaps

into place with an audible click.

Clean the brewing system thor­

oughly, especially in the area of the

clamp.

Brewing unit cannot be

opened.

The brewing unit is still

locked.

Wait until the Status LED

F

has

stopped blinking before attempting

to open the brewing unit.

Water dripping from the

brewing unit.

The T DISC is damaged

or leaky.

Stop the brewing process. Wait

until the machine is cooled down

before removing the T DISC and

then clean the brewing unit

The piercing unit is

either not inserted or not

inserted properly.

Check to ensure that the piercing

unit is inserted properly.

TAS43_EU.indb 32

21.12.2012 10:51:52

Advertising