Avenview DVI-SPLITPRO-2BB - Manual (Page 10)

www.avenview.com 10
1.9 IR Remote Control
DVI-SPLITPRO-2B ships with a compact remote control that allows for direct access to most commands used to
control the video processor.
1. Power Power ON/OFF the device
2. PIP Border Display the border of small image (under PIP
mode)
3. UP Button Move to the upper titles
4. Source Press to select a source for main channel
5. Reset Factory Reset
6. Right Button Move to the right titles
7. Menu Display OSD Menu
8. Left Button Move to the left titles
9. Logo Display Logo
10. Exit Move back to previous option or exit OSD Menu
11. Down Button Move to the lower titles
12. Enter Press to drop down sub-menus or confirm the
selection
13. Blank Blank out the screen
14. Color Automatically configure the main channel color
15. Auto Automatically configure the man channel position
16. V Flip Flip vertically
17. H Flip Flip Horizontally
18. SWAP Swap between main channel and sub-channel
(only works in PIP or PAP mode)
19. PIP Changes mode: Full Screen, PIP and PAP
20. Sub Pause Freeze sub-channel
21. Main Pause Freeze main channel