Avenview DVI-SPLITPRO-2BB - Manual (Page 12)

www.avenview.com 12
Main Source: Select an input source for the main channel (VGA / YPbPr, DVI, Composite, VGA)
Main Control:
Display
Brightness (Slider) Hue (Slider)
Contrast (Slider)
Flesh-tone (Button: Off, Weak, Soft,
Strong)
Saturation (Slider)
Image
Scaling (1:1, Fill, Aspect, Panorama) Angle Filtering (Button: Off, On)
Adaptive De-interlacing (Button: Off, Level 1,
Level 2, Level 3)
Film Mode Detect (Button: Off, On)
Noise Reduction (Button: Off, Low, Med, High) Sharpness (Slider)
Position
Zoom(Button: In, Out) Zoom Vertical Pan (Button: Down, Up)
Zoom Horizontal Pan (Button: Left, Right) Vertical (Slider)
Horizontal (Slider)
Color
sRGB (Button: Off, On Cl.BA) Red (Slider)
Gamma Correction (Button: Off, 2.2, 2.4) Green (Slider)
Color Temperature (Button: User, 6500K,
9300K)
Blue (Slider)
PIP Control
PIP Mode (Off, Single, PAP) Vertical (Slider)
PIP Size (Small, Medium, Large) Horizontal (Slider)
Blend (Slider)
Logo (Off, On)
Border
(Off, On)
Red (Slider) Green (Slider)
Blue (Slider) Width (Slider)
Sub Source: Select an input source for sub-channel (VGA/component, DVI, composite, VGA)
Sub Control: The same as Main Control
OSD Control:
Vertical (Slider) Horizontal (Slider)
Time out (Slider) OSD Zoom (On, Off)
Blend (Slider)
Language
Selection:
English and Traditional Chinese
Factory Reset: Reset the device to default
Resolution
Selection:
Press Down Button to select an output resolution and then press enter to confirm that
selection
800×600 @60Hz, 1280×768 @60Hz, 1440×900 @60Hz, 1920×1080 @50Hz
1024×768 @60Hz, 1280×1024 @50Hz, 1400×1050 @50Hz, 1920×1080 @60Hz
1152×864 @75Hz, 1280×1024 @60Hz, 1400×1050 @60Hz, 1920×1200 @50Hz
1280×720 @50Hz, 1366×768 @60Hz, 1600×1200 @60Hz, 1920×1200 @60Hz
1280×720 @60Hz