2 inserting label material, 1 prerequisites, 3 . 2 i n s e r t i n g la b e l m a t e r i a l – Avery ALS 256 User Manual
Page 36
Advertising
32
C
ONTENTS
3.2 I
NSERTING
LABEL
MATERIAL
ALS
20x
256
GB
3.2.1
Prerequisites
– The label dispenser is turned off at the main
switch [31A] (switch set to ‘O’).
£
Check that the safety installations are working
properly.
£
Inspect the machinery for any visible damage.
Report any defects immediately.
£
Remove any unnecessary materials and objects
from the operating area of the unit.
£
Make sure that only authorised persons are within
the operating range of the machine.
£
Use the required personal protective equipment
correctly; forexample, wear a hairnet, safety
glasses.
[31] Main switch on the housing.
A
3.2
INSERTING LABEL MATERIAL
Advertising