Stopping the engine, Operating on hills, Operation – Poulan Pro 461ZX_966681802 LAWN TRACTOR User Manual

Page 19

Advertising
background image

19

oPERaTIoN

Stopping the Engine

1. Move the throttle to the minimum position (tortoise

symbol).

2. Move the steering controls outward.

3. Disengage the mower deck by pressing the blade switch

down.

4. Raise the mower deck by pressing the release button on

the lever and pulling the lever upward to the transport
position.

IMPORTANT INFORMATION leaving the ignition switch
in any other position than oFF will cause the battery to be
discharged.

5. When the machine is standing still, activate the park prake

by pushing the lever release button and pulling the lever
upward.

If the engine has been worked hard, allow it to idle at
least 60 seconds to attain a normal operating temperature
before stopping. To prevent fouling the spark plugs, avoid
idling the engine for longer periods.

6. Turn the ignition key to the stop position. Remove key.

Always remove key when leaving the mower to prevent
unauthorized use.

WARNING! Never drive the rider on terrain that

slopes more than 10 degrees. Mow slopes up and down,
never side to side. avoid sudden directional changes.

Operating On Hills

Read the Safety Instructions Driving on Slopes in the Safety

section.

• The slowest speed possible should be used before starting

up or down hills.

• Avoid stopping or changing speed on hills.
• If stopping is absolutely necessary, pull steering controls

into the neutral position and push to the outside of the unit.
Engage the park prake.

• To restart movement, release the park prake.
• Pull the control levers back to the center of the mower and

press forward to regain forward motion.

• Make all turns slowly.

Advertising