Cutting blades, Blade replacement, Cleaning – Poulan Pro 461ZX_966681802 LAWN TRACTOR User Manual

Page 28: Hardware, Maintenance

Advertising
background image

28

MaINTENaNCE

28

Cleaning

Regular cleaning, especially under the mower deck, will
increase the machine’s life-span. Make it a habit to clean the
machine directly after use (after it is cooled), before the debris
sticks.
Do not spray water on the top of the mower deck. Use
compressed air to clean the top side of mower deck. Regularly
clean the underside of the deck with normal water pressure.
Do not use a high pressure washer or steam cleaner. Avoid
spraying engine and electrical components with water.
For models fitted with a cleanout port, attach the quick connect
(from the accessory packet) to any garden hose. After mowing,
let unit cool before washing. Snap the hose to the cleanout port
and turn on water supply.
Restart the mower and engage the blades to use the spinning
action to wash away debris. Make sure the hose is away from
the mower blades.

Hardware

Check daily. Inspect the entire machine for loose or missing
hardware.

Cutting Blades

To attain the best mowing effect, it is important that blades are
well sharpened and not damaged.
Replace blades that have been bent or cracked when hitting
obstacles.
Let the service workshop should decide whether the blade can
be repaired/ground or must be replaced. Balance the blades
after sharpening.
Check the blade mounts.

Blade replacement
1. Remove blade bolt by turning counterclockwise.
2. Install new or resharpened blade with stamped GRaSS

SIDE facing towards ground/grass (down) or THIS SIDE
UP facing deck and spindle housing.

3. Seat the blade opening firmly onto the spindle housing.
4. Tighten blade bolt securely.
5. Torque blade bolt to 45-60 ft/lbs (60-81 Nm).

CAUTION! Blades are sharp. Protect your hands
with gloves and/or wrap blades with a heavy cloth
when handling.
The sharpening of blades should be carried out by
an authorized service workshop.

IMPORTANT INFORMATION Special blade bolt is heat
treated. Replace with a Poulan Pro bolt if required. Do not
use lower grade hardware than specified.

CAUTION! Use protective glasses when cleaning

and washing.

Advertising