Poweramp POWERSTOP A 11.1996 - Manual (Page 11)

A typical installation will require mounting of the outside light box as shown in Figure
11. The control box mounting is generally inside the building on the left hand side of
the overhead door.
8
Installation
CAUTION
Have all electrical work
performed only by qualified
electricians.
WARNING
Be sure power supply
circuit is open at main
service box or circuit
breaker prior to electrical
installation. Failure to
disconnect power supply
could result in equipment
damage and/or personal
injury or death. Always
follow proper lock out tag
out proceedures.
INSTALLATION OF ELECTRICAL COMPONENTS
When equipped with a Dock Alert II light communication package, the Automatic
Truck Restraint includes a prewired control box, outside light box, and (2) outside
truck driver signs and a hydraulic power unit. Components such as conduit, fittings,
anchors, etc. are supplied by others. Quality workmanship using materials approved
by code is required.
Figure 11
Figure 12 illustrates a
powerpack mounting
location on the dock face.
In this location, flooding,
snow removal and damage
from trailer/trucks should
be considered.
Figure 12
The location of the powerpack will vary from job to job. Figures 12 through 14 illustrate
several possible locations for the powerpack. when determining a suitable location for
the Powerpack, many things must be considered.
• Is the dock subject to flooding?
• Is the powerpack subject to truck/trailer damage?
• Is the powerpack subject to fork truck damage?
• Is snow removal a concern?
• Will the moving parts of a dockleveler damage the restraint?