Poweramp BAR - LIFT BARRIER - Manual (Page 4)

Poweramp model B-2-B, Bar Lift Barrier is capable of withstanding a 5 ton impact at
4 miles per hour. Hydraulic activation by push button control will raise the barrier to
allow loading/unloading. After loading/unloading is complete, push button control
allows barrier to be lowered to its normal safe position. A yellow light will illuminate
when ever the barrier is in transition from either its horizontal or vertical position.
The barrier is equipped with deadman control which eliminates movement when the
raise/lower push button is released. A 115/1/60, 1-1/2 HP power pack with push
button control is standard. As an option, the unit may be 3 phase power and/or
interlocked with any Poweramp hydraulic dock leveler.
______ SINGLE PHASE
______ 12O VOLT 60 HZ
______ 240 VOLT 60 HZ
______ THREE PHASE
______ 240 VOLT 60 HZ
______ 480 VOLT 60 HZ
______ SPECIAL ELECTRICAL
________________________________________________________________________
______________________________________________________
_____________________________________________________
PRODUCT REQUIREMENTS
______ OPTIONAL UNDER-RIDE GUARD
______ SPECIAL MECHANICAL (PAINT,
ETC.)
______________________________________________________________________
______________________________________________________
_____________________________________________________
______________________________________________________
_____________________________________________________
DOOR OPENING
OVERHEAD CLEARANCE
DOCK LEVELER PIT IF APPLIES
16
8 1
MINIMUM INSIDE CLEARANCE
RESTRICTED OUTSIDE LENGTH
DOOR CENTER TO CENTER
SPECIFICATIONS - SAFETY BARRIER
2
or