Poweramp BAR - LIFT BARRIER - Manual (Page 8)

1. Visually check path of barrier travel to make sure it is clear of objects and person-
nel.
2. Press and hold “RAISE” push button.
3. Amber light will be on any time barrier is not fully stored either up or down.
4. When amber light goes “off”, release “RAISE” push button.
TO LOWER BARRIER
1. Visually check path of barrier travel to make sure it is clear of objects and person-
nel.
2. Press and hold “LOWER” push button.
3. Amber light will be on any time barrier is not fully stored either up or down.
4. When amber light goes “off”, release “LOWER” push button.
OTHER OPERATION
The above instructions are for the basic barrier configuration. Some applications will
involve interfacing with other equipment such as docklevelers, restraints, overhead doors
etc. Be sure to read the operating instructions supplied with the particular unit.
EVERY WEEK
1. Inspect unit to be free of debris and other foreign material which might hamper
operation.
2. Run barrier through a full cycle to check operation. Check that the amber light is
on in all positions except fully stored up or down.
OPERATING INSTRUCTIONS
6