Chapter 6 specification – PROLiNK PRO1301WE User Manual User Manual
Page 22
Chapter 6 Specification
Section 1 Plug and Play
The Mobile Monitor conforms to VESA DDC standard and supports VESA DDC2. DDC2B
is a bi-directional data channel based on I
2
C protocol. The host can request EDID infor-
mation over the DDC2B channel. The Mobile Monitor is able to inform the host system
of its identity, and depending on the level of DDC used, communicate additional infor-
mation about its display capabilities.
Section 2 Standard Default Modes
Section 3 Troubleshooting
1.
With Digital Video cable
20
Display Mode
Resolution
1
MAC
640x480
60
Hz
2
VESA
720x400
60
Hz
3
SVGA
800x600
56
Hz
4
SVGA
800x600
60
Hz
5
XGA
1024x768
60
Hz
6
WXGA
1366x768
60
Hz
Problem
Screen Display
Solution
No screen
image
Please check if the video and USB-Powered plug
is correctly connected to the Mobile Monitor’s
video power port.
Blank screen
Please check if USB-Powered cable is connected
to a 5V DC power source.
Please adjust Brightness and Contrast settings, or
reset them to factory default via OSD.
OSD shows “No
Signal” warning
Please check if Digital Video cable is correctly
connected to Mobile Monitor’s video input port
and computer’s HDMI output port.