PROLiNK PRO1301WE User Manual - Manual (Page 3)

Chapter 1 Content Description
Section 1 Notices of using Mobile Monitor
1. The cable may be damaged if you pull it out by force. To disconnect power cable
connector from the Mobile Monitor, please push the connector towards right hand
side as illustration shown.
2. Notice when installing the Mobile Monitor onto your laptop:
● Use the laptop and Mobile Monitor on a flat surface. Otherwise, the laptop
and Mobile Monitor may topple.
3. PRO1301WE Mobile Monitor only reads DVI Digital Video signal; it does not sup-
port complete HDMI interface and does not have a speaker.
● When using PRO1301WE, first flip
the Mobile Monitor to horizontal
position, and then only open the
laptop’s monitor. Avoid knocking
against objects on the table.
● As shown below, it is recommend-
ed to rotate the Mobile Monitor to
proper viewable position to the
user (i.e., angle between 180° -
225°)
● Keep the laptop away from the
table edge to prevent it from
falling off the table if it topples.
● The laptop’s monitor should be
positioned in an upright position to
prevent it from toppling. If the
laptop’s monitor tilts, it means the
laptop might not be able to sustain
the weight.
Warning: DO NOT unplug by pulling
the cord.
1
Fig.: Push out the connector towards
right hand side.