PROLiNK MH8241 - Manual (Page 73)

73
5.10 Load Balance
5.10.1 Mode
Broadband Router provides three load balance work modes:
Session
All the enabled WAN ports have the same (1:1) bandwidth
rate.
Weight round
robin Configure the WAN ports bandwidth rate manually.
Traffic Router will find the lowest loading WAN port to transmit and
receive data automatically.
Session mode:
When choose this mode, the router will assign each coming session
To each WAN port one by one, no matter how traffic loading on each WAN
port.
LOAD BALANCE
Weight Round Robin mode:
Configure the WAN ports bandwidth rate manually, means you can
Distribute each coming session from users to each WAN port, following the
Rate that you assign in each WAN port.
The session number in each WAN can be numbered from 1 to 100,
The suggest number is under 1 ~10. if rate is 1:1 for each WAN port , the
router function will act like Session mode