PROLiNK MH8241 - Manual (Page 87)

87
5.11.6 IP Binding (Protocol Route Control)
In Internet world, there have some Game Server ,SSL protocol user or Personal
Server have special request for connection, these special request include.
(1). Use special port number to perform specific function.
(2). Not allow user connect with multiple WAN IP address
For Example,
if user use load Balance function provide by router to connect Server, Server
might response with many login display back to user, because each session comes
different WAN port with different IP address, Server treat it like different request
By enable this function, you can specific the IP packet will go through dedicate
WAN port to reach dedicate destination server. they will show only 1 IP address.
That means if destination server address show in this display, when user
wants to reach these destination server, the packet will only go through dedicate WAN
port, it can not have load balance function.
Note:
IP Address: destination server IP address, it will be restrict to dedicated WAN port.
“ if do not specific destination Host IP address in this field, the port number specific
in the port number field will be limit packet transfer in dedicated WAN port.
Starting port: the packet of specific protocol port number will be restricted.
End port: the packet of specific protocol port number will be restricted
The protocol port number start from 0 to 65535, you can decide what range of port
number will be restrict. if enter.
0 0 all packet will be restrict to dedicated WAN port
blank blank all packet will be restrict to dedicated WAN port
80 80 only packet type of port 80 will be restrict, the rest
type packet will not be restrict, can use load balance
function.
1 21 only packet type of port 1 to port 21 will be restrict,
the rest type packet will not be restrict, can use load
balance function.
WAN: select WAN port to be transfer packet for dedicated destination packet.
Example (1)
IP Address Start port End Port WAN
210.3.1.23 0 65535 WAN1
All packet go to Internet Host with IP 210.3.1.23 will be restrict to dedicated WAN 1
Example (2)
IP Address Start port End Port WAN
210.3.1.23 0 0 WAN2
Packet type belong to protocol 23 that go to Internet Host with IP 210.3.1.23 will be
restrict to dedicated WAN2
Example (3)
IP Address Start port End Port WAN
Blank 21 21 WAN1
Packet type belong to protocol 21(FTP) that go to any of Internet Host will be
restrict to dedicated WAN1