PROLiNK WG3000 Wireless LAN Card 802.11g - Manual (Page 29)

- 25 -
Encryption 1-4 To configure your WEP settings. WEP (Wired
Equivalent Privacy) encryption can be used to
ensure the security of your wireless network. Select
one Key and Key Size then fill in the appropriate
value/phrase in Encryption field. Note: You must
use the same Key and Encryption settings for the
both sides of the wireless network to connect
KEY1 ~ KEY 4：You can specify up to 4 different
keys to decrypt wireless data. Select the Default
key setting from the radio button.
Encryption：This setting is the configuration key
used in accessing the wireless network via WEP
encryption.
A key of 10 hexadecimal characters (0-9, A-F) or 5
characters (ASCII) is required if a 64-bit Key
Length was selected.
A key of 26 hexadecimal characters (0-9, A-F) or
13 characters (ASCII) is required if a 128-bit Key
Length was selected.
A key of 58 hexadecimal characters (0-9, A-F) or
29 characters (ASCII) is required if a 256-bit
Key Length was selected.
Key size 40 Bit, 128 Bit or 256 Bit.
802.1x Configuration
The 802.1X Configuration window is used to configure WEP, CCX and
WPA security with 802.1X authentication.