PSA PANQ916K, Q916K/SP - Manual (Page 9)

9
Operating the room station.
Paging. General paging throughout all stations, except the Door Station,
can be performed by pressing and holding the
TALK button while
talking and releasing to hear a reply. To answer the intercom page, the
responder presses the
TALK button once to respond to the page and
can then reply hands-free. The caller must hold the TALK to talk and
release to listen.
Pressing the CANCEL button will end the conversation. If cancel is not
pressed, the system will auto-cancel after 30 seconds.
Mute. Any Room Station can be muted or locked-out for privacy. Pressing
and holding CANCEL first then DOOR Release button, will cause
that station to be muted. When a station is muted, it will not be able to hear
the door chime, a monitored station or intercom page. Mute can be
cancelled by pressing the cancel button on that station.
Monitor. Any Room Station can be monitored by other Room Stations.
Pressing and holding the CANCEL first and then TALK button
together on the Room Station will initiate monitoring mode. Monitoring can
be cancelled by pressing the Cancel button of the monitored room
station. Only one Room Station can be monitored at any one time.
LEDs . The Panacom Q916 is equipped with red and green LEDs to
indicate system mode and status. The table below describes the functions
of each LED indicator.
Volume Control. All Stations have individual volume control located on
the side of each room station. Adjusting the volume will alter the volume of
both intercom sound and door chime for that station only.
Action/Status Red LED Green LED Blue LED
System standby or default. Solid
Door Station in standby or activated mode Solid
Room Station responding to Door Station Solid
Room Station initial intercom page Flashing
Answering a Room Station intercom page Solid
Room Station in Mute mode Solid Solid
Room Station being monitored Flashing
Room Station listening to monitored station Solid