AGFA SNAPSCAN E10 - Manual (Page 13)

Chapter 2: Installing the Scanner for PC 13
Minimum System Requirements
" A USB port
" A Pentium® processor
" A 14 inch color monitor
" A video card that can display a minimum of 16 bit high color
" 32 MB of RAM (64 MB of RAM is recommended)
" A CD-ROM drive
" Windows® 98
" ScanWise is compatible with all IBM™ PCs and compatibles running
Windows 98/2000
" The amount of disk space available on your PC determines the number and the size of the
images that you can scan. Make sure that you have enough free storage space on your hard
disk. You need about two times the size of the image to scan, edit and save it.
Installing the Scanner Software
1 Insert the Agfa ScanWise CD-ROM in your CD-ROM drive.
# Note: If the ScanWise Installer program does not appear automatically, carry out the
following instructions:
1 Double-click My computer.
2 Double-click the CD-ROM drive.
3 Double-click Setup.exe.
2 Click the up or down arrow to select your language.
This selection determines the language of the ScanWise software and documentation.
3 Click the up or down arrow to select your type of scanner (if needed).
4 Click the dotted right arrow or move the slider to about ScanWise.
A demonstration of ScanWise will start.
5 Click the dotted right arrow or move the slider to Install.
6 Click Acrobat Reader to start the installation.
You need Acrobat Reader to read the documentation.