Configuring rfc 1483 bridging/routing sessions, Configuring rfc 1483, Bridging/routing sessions – ADC 400F User Manual
Page 45: Rfc 1483 b, Onfiguring, Ridging, Outing, Essions
Chapter 6: Configuring Sessions
Megabit Modem 400F User Manual
37
C
ONFIGURING
RFC 1483 B
RIDGING
/R
OUTING
S
ESSIONS
You can configure the modem as a bridge to forward Ethernet data based on MAC addresses,
as a router to route Ethernet-encapsulated IP datagrams based on IP addresses, or as both. From
the
EasySession
pages, configure parameters for communicating between the modem and the
service provider over the WAN (
). Then, configure parameters for communicating
between the LAN and the modem (
). After setting up all appropriate Bridge/Router
WAN and LAN parameters, select the sessions that you want to activate (see
).
1
Click
EasySession
on the
Main Menu
to access the
EasySession
page.
2
Click
Edit
next to any
Port 1-32
field to display the
Brouter WAN Port Configuration
page for the
selected port.