Configuring the wan for rfc 1483 bridge/routing – ADC 400F User Manual
Page 46
Configuring RFC 1483 Bridging/Routing Sessions
38
Megabit Modem 400F User Manual
Configuring the WAN for RFC 1483 Bridge/Routing
You will configure the WAN parameters for RFC 1483 sessions between the Megabit Modem
400F and the service provider.
1
Do the following to configure the WAN:
.
Select a name for the service that is descriptive. The service name is an
identifier you use for the session and is not used for anything else. When you
enter a service name, it displays as the Port name for that session on the
EasySession page.
Enter a descriptive name for the
Service Name
. The name you enter here also displays
in the
Port
field on the
EasySession
page (the fields are linked). Use a maximum of
19 characters for the service name, with no spaces allowed or double quotes in
the name.
Enter the
ATM VPI
and
ATM VCI
values provided by the service provider. The
addresses are the virtual path identifier and virtual channel identifier for the session
connection (ATM) between the modem and the service provider. (See
for
the VPI and VCI values you recorded from the service provider. Also, see
for information on VPI and VCI values.)