Configuring wireless printing – Airlink101 APSUSB201W User Manual
Page 16
Advertising
15
8. Configuring Wireless Printing
8.1 Infrastructure Mode Printing
The following section describes how to setup the Print Server for wireless printing. It is
strongly recommended that you test the Print Server with a wired connection first before
moving on to configure wireless printing.
Note:
You should use a wired connection to configure the following wireless settings
before unplugging the network cable from the Print Server.
Step 1
Open the web browser and type in the IP address of your Print Server. (Default
is 192.168.1.254)
Step 2
Verify the Printer Status is On line.
Step 3
Click on Configuration and then Wireless.
Advertising