Airlink101 APSUSB201W - Manual (Page 27)

26
10.2 Configuration
Click on Configuration to display the Configuration page.
System
The System page allows you to configure basic settings of the Print Server.
Server Name: You can rename the Print Server to a more user-friendly name or keep
the factory default name.
Location: You can make note of where the Print Server is located (optional).
Admin Contact: Name of the administrator to contact for help (optional).
Password: You can set a password for the Web Configuration Utility so only
authorized personnel can access and change the Print Server’s configuration.
USB Port Name: You can rename the Print Server’s port name to a more user-friendly
name or keep the factory default name.
Description: Describe the printer that is attached to the Print Server (optional).
PJL Printer: Choosing Yes will enable the support for Hewlett-Packard PJL (Printer Job
Language) standard for bi-directional printing. (Default is No).
Click Save to save and activate any configuration changes. Click Cancel to cancel the
changes.