Asus CUPLE-VM JumperFree PC133 - Manual (Page 50)

ASUS CUPLE-VM User’s Manual 50
4. BIOS SETUP
4. BIOS SETUP
Advanced Menu
PS/2 Mouse Function Control [Auto]
The default of [Auto] allows the system to detect a PS/2 mouse on startup. If de-
tected, IRQ12 will be used for the PS/2 mouse. IRQ12 will be reserved for expan-
sion cards only if a PS/2 mouse is not detected. [Enabled] will always reserve IRQ12,
whether on startup a PS/2 mouse is detected or not. Configuration options: [En-
abled] [Auto]
USB Legacy Support [Auto]
This motherboard supports Universal Serial Bus (USB) devices. The default of [Auto]
allows the system to detect a USB device on startup. If detected, the USB controller
will be enabled. If not detected, the USB controller will be disabled. When this field
is set to [Disabled], the USB controller is disabled no matter whether you are using
a USB device or not. Configuration options: [Disabled] [Enabled] [Auto]
OS/2 Onboard Memory > 64M [Disabled]
When using OS/2 operating systems with installed DRAM of greater than 64MB,
you need to set this option to [Enabled]; otherwise, leave this on [Disabled]. Con-
figuration options: [Disabled] [Enabled]