Asus CUPLE-VM JumperFree PC133 - Manual (Page 83)

ASUS CUPLE-VM User’s Manual 83
6. SOFTWARE REFERENCE
6. S/W REFERENCE
V
ideoLive Mail
6.4.2 CyberLink VideoLive Mail User Interface
6.4.1 Starting VideoLive Mail
To start VideoLive Mail, click the Windows Start button, point to Programs, and
then CyberLink VideoLive Mail, and then click VideoLive Mail x.x. VLM 3’s
Setup Wizard will start and guide you through configuring the video and audio input
peripherals and to setup the e-mail environment.
1. Setup Wizard first will prompt a dialog to confirm that you want to configure
the hardware and E-mail setting. Click Yes to continue the system parameter
configuration.
2. The e-mail configuration screen appears. You will need to enter your name and
the e-mail address. Click Next to continue.
3. The Internet e-mail configuration screen appears. You may choose to use the
VLM 3 built-in E-mail functionality (SMTP mail), or use MAPI compliant e-
mail system. Consult your ISP or MIS staff for the E-mail server IP address if
you are not sure. Click Next to continue.
4. Then the Video Configuration screen shows up. You may have to specify the
video driver for VLM 3, if there are several video-input devices installed. Then
configure the number of video frames to be captured per second. Note that the
more frames you choose, the bigger the file size will be. Click Next to continue.
5. Then the Setup Wizard will then search for the GSM CODECS module for au-
dio compression, and prompt you with the result. Click Next to continue.
6. Setup Wizard then tests the audio volume during playing and recording. Click
Next when ready.
7. Configuration done. Click Finish to complete the environmental setting proce-
dure.
Start Playback
Video Configuration
Snapshot to File
Exit
Minimize
Help
Pause
Stop Recording / Playback
Start Recording
Increase MIC volume
Decrease MIC volume
Increase speaker volume
Decrease speaker volume
Video Mail Wizard
Send Mail
Send Mail
Save Video File
Load Video File