Acura Music Link bii32726-34939 User Manual
Page 2
2 of 7
BII 32726-34939 (0703)
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
TOOL AND SUPPLIES REQUIRED
#2 Phillips screwdriver
Flat-tip screwdriver
Ratchet
10 mm Socket
10 mm Combination wrench
Tape measure
Felt-tip pen
Isopropyl alcohol
Shop towel
Masking tape
Illustration of the Acura Music Link Installed on the
Vehicle
3.
Remove the passenger's side under cover (five
clips, and release the two pins and two vehicle
connectors).
4.
Open the glove box. Remove the damper rod
cover and release the damper rod. Lower the
glove box while pushing in on the left and right
sides.
INSTALLATION
Client Information: The information in this
installation instruction is intended for use only by
skilled technicians who have the proper tools,
equipment, and training to correctly and safely add
equipment to your vehicle. These procedures should
not be attempted by “do-it-yourselfers.”
1.
Make sure you have the anti-theft code for the
radio, then write down the frequencies for the
preset buttons.
2.
Disconnect the negative cable from the battery.
5N14011S
PASSENGER'S
SIDE UNDER
COVER
CLIPS (5)
PINS (2)
VEHICLE
CONNECTORS (2)
6411050S
GLOVE BOX
DAMPER
ROD
COVER
5N15111S
BUS
CABLE
MUSIC LINK
HARNESS
ACURA MUSIC
LINK UNIT
AUDIO
UNIT
Y-HARNESS
ADAPTER