Acura Music Link bii32726-34939 - Manual (Page 4)

4 of 7
BII 32726-34939 (0703) © 2007 American Honda Motor Co., Inc. - All Rights Reserved.
9. Attach four pieces of masking tape to protect the
center console in the area shown. 12. Insert the Acura Music Link unit into the holder
cushion.
10. Remove the audio unit (four bolts). Pull the audio
unit out and unplug the nine vehicle connectors.
11. Get the Music Link harness. Measure and mark
the Music Link harness at the location shown
using a felt-tip pen.
5N15011S
FELT-TIP PEN
MARK
MUSIC LINK
HARNESS
700 mm
5N14071S
VEHICLE
CONNECTORS (9)
BOLTS (4)
AUDIO UNIT
CENTER
CONSOLE
MASKING TAPE
ACURA
MUSIC LINK
UNIT
6905090B
HOLDER
CUSHION
Align ends.
13. Plug the bus cable DIN connector (black) and the
Music Link harness DIN connector (white) into the
Music Link unit.
NOTE: To avoid connector damage, orient the
connectors properly with the flat side up, and
insert them straight in (not crooked). To remove,
pull back on the slide collar to release a locking
mechanism. Do not pull on the cable, or you can
damage it.
BUS CABLE
DIN CONNECTOR
(BLACK)
Upside
MUSIC LINK
HARNESS DIN
CONNECTOR
(WHITE)
Upside
ACURA MUSIC
LINK UNIT
6903010H