Declaration of conformity – SPP Pumps Unistream User Manual
Page 2
DECLARATION OF CONFORMITY
Our policy is one of continuous improvement and we reserve the right to alter specifications at any time
Page 2 of 24
We
SPP Pumps Limited
Of
Crucible Close
Mushet Industrial Park
Coleford
Gloucestershire
GL16 8PS
Declare that:
Equipment:
CENTRIFUGAL PUMP
Model/Type:
UNISTREAM RANGE
Serial Number:
As shown on the Pump Nameplate
For pumps and pumpsets:
in accordance with the following Directives:
2006/42/EC
The Machinery Directive
and its amending directives
2006/95/EC
Low Voltage Directive
have been designed and manufactured to the following specifications:
EN 809:1998+A1:2009
Pumps & Pump Units for Liquids - Safety Requirements
EN 12100:2003
Parts 1 and 2 - Safety of Machinery
EN 60204-1
Safety of Machinery - Electrical Equipment
We hereby declare that the equipment named above has been designed to comply with the relevant sections
of the above referenced specifications. The units comply with all essential requirements of the Directive.
For pumps supplied without drivers:
We hereby declare that this equipment is intended to be incorporated into, or assembled with other machinery
to constitute relevant machinery to comply with the essential health and safety requirements of the Directive.
The machinery covered by this declaration must NOT be put into service until the relevant machinery into which
it is to be incorporated has been declared in conformity with the provisions of the Directive.
Signed:
Name:
John Hollins
Position:
Engineering Manager - Authorised to sign on behalf of SPP Pumps Limited
Mushet Industrial Park, Coleford, Gloucestershire, England, GL16 8PS
Date:
25 February 2010
W21-002E