Andrew 5.6-Meter ESA - Manual (Page 13)

Support Legs
Assembly
Step 1
Step 2
13
Attach 201327 joint assembly to 201313 beam assembly as shown in Figure 5. Attach
200083 angles to 201313 beam assembly as shown in Figure 5.
•
Use 7/8 x 2-1/4 in (57 mm) bolts and nuts for each connection
Installation Procedures
Figure 5
Attach 200088 joint assembly to 201313 beam assembly as shown in Figure 6.
•
Use 7/8 x 2-1/4 in (57 mm) bolts and nuts
Figure 6