Andrew 5.6-Meter ESA - Manual (Page 25)

Azimuth
Jackscrew
Assembly
Step 1
Step 2
Mount Assembly
Step 1
Step 2
25
Installation Procedures
Insert 22193/223180 azimuth jackscrew tube into 201287 azimuth pivot assembly as
shown in Figure 29. Insert jack carefully to prevent scratching jackscrew tube. Note:
Ensure jackscrew assembly remains fully retracted at this time.
Figure 29
Apply RTV to flange surface as shown in Figure 29. Fasten jack to pivot using 7/8 x 2-
3/4 in (70 mm) bolts and nuts. Mounting hardware is included with corresponding jack
assembly hardware kit.
Attach shackles to beam assembly as shown in Figure 30.
22193/223180
Figure 30
Lift support legs to azimuth beam assembly.