Elite Screens Evanesce Series - Manual (Page 5)

5
A. Above ceiling installation instructions
Assembly
2. Hanging bracket Assembly
Place the Hanging Bracket (C) over the Casing Rail Nut (A) that’s located inside the channel of the screen’s case
and secure it with the Hex Screw (B)
3. Suspension Bar Installation
Place the Suspension Bars (D) on the Hanging Bracket (C) and align with the hole as shown below. Secure the
Suspension Bar (D) with the Hex Screw (B), Washer (E) and the Hex Nut (F). Install the Suspension Bars (D) to
your ceiling according to their distance.
B. Below ceiling installation instructions
1. Measure and cut the ceiling installation space. The width should not exceed 120mm. Please refer to the length
on the screen size table (C3).
Note: The length of the installation space is not greater than the screen size table (C3), and the width is not less
than the screen size table (A5). Consult the table below (C1) in regards to accommodating the screen casing.
D
B E E F