Elite Screens Evanesce Plus Series - Manual (Page 6)

Rev.040313-JA www.elitescreens.com 6
Side schematic diagram:
For local Elite Screens contact or Technical Support, please visit
www.elitescreens.com
Leaning the end flange piece and
put the bottom part so it may
insert into the housing groove.
Push the end flange upwards to allow the
top part and housing to come together.
Ceiling
End flange piece location
Attention:
1. The end flange panels can easily warp. Please be
careful when handling them and during installation.
2. Make sure the end flanges are properly installed
and leveled with the housing.
3. As a safety precaution four people are required
for this installation.