Elite Screens QuickStand Series - Manual (Page 6)

Rev043010-JA
www.elitescreens.com
[email protected]
locking bolt
frame spacer
fig 15
SAT-Leg (optional added stability buttress recommended for the
large screens with diagonal measurements of 180” and over)
1. Take the SAT-Leg out of the case and remove it wrappings as shown in (fig13).
2. Undo the snap locks to loosen and bend the joints for proper fitting as shown in (fig 14).
3. Attach the SAT-Legs by securing the locking bolts through the frame using the frame spacers between
the metal parts as shown in (fig 15)
fig 13
fig 14