Elite Screens ezCinema Series - Manual (Page 4)

Rev101912-JA www.elitescreens.com 4
Installing the support rod:
First, make sure that the hanging hook is pointing toward the front facing the same direction as the
screen, then insert the square end of the telescopic support rod into the support plate as shown below.
Pull up the screen:
Hold the pull hook with one hand, pull the screen up gently and hang it on the bracket hook.
Vertical Adjustment:
First loosen the locking sleeve, and then hold the small support rod with the left hand so as to slowly raise
it upwards until the screen is fully stretched to the desired position.
Support
Plate