Aastra Telecom 9116 - Manual (Page 20)

19
Memory keys
Saving features in memory keys
†
For easy access, you can save the feature codes of telephone company services in your
memory keys. This works well with network features such as Call Forwarding and
Call Return. Some features require an On and Off code in two separate keys, while
other features are stored on only one key. The following procedures show you how to
save both an On and Off code.
Using feature keys
When a memory key is programmed with a feature code, you can use the memory key
to activate or deactivate the feature.
† You must subscribe to your telephone company for Custom Calling Features.
To save a Feature On code: To save a Feature Off code:
1. Press the memory key where you
want to save the number. 1. Press the memory key where you
want to save the number.
2. Press K. 2. Press K.
3. Enter the telephone company fea-
ture code for turning the feature on.
†
† Note: Contact your telephone company for the appropriate feature codes.
3. Enter the telephone company fea-
ture code for turning the feature off.
†
Read the display to conÞrm the number. Read the display to conÞrm the number.
4. Press K. 4. Press K.
5. Enter the feature name using the dial
pad. (See
Entering Names on
page 13.)
5. Enter the feature name using the dial
pad. (See
Entering Names on
page 13.)
6. Press K. 6. Press K.
7. Label the memory key. 7. Label the memory key.
To turn a feature on or off:
1. Press the memory key where you stored the desired feature. The display shows
the feature name and code.
2. Lift the handset or press either D or Q .
The feature code is dialed out, which turns the feature on or off.
9116 E UG.fm Page 19 Thursday, April 17, 2003 4:16 PM