Gx2401c, Owner’s manual, English version – Audiovox GX2401c User Manual
Page 18
GX2401c I/B version 09050A-1
17 09050A-1
OWNER’S MANUAL#
GX2401c
VER.09050A-1
PAGE:
17
English version
2.
Press (+) or (-) button or enter the memory location to find the
memory location you want.
3.
Press C. BACK button. The unit will make a call and the
selected telephone number will be dialed automatically.
EDITING STORED TELEPHONE NUMBERS
1.
Ensure that the handset is in standby mode.
2.
Press MEMO button on the handset. The LCD Display will show "MEMORY".
3.
Search for the stored entry by pressing (+) or (-) button to scroll through the Memory
Dialing Directory or by pressing the keypad button to enter the memory location number
(01 -20) which has the name and number stored.
4.
Follow steps 4-7 as described in the section Storing Telephone Numbers Into Memory to
overwrite the selected entry.
MIXED MODE DIALING (Temporary Pulse to Tone Dialing)
1.
If you only have pulse (rotary dialing) service in your area and want to access Tone
services (Bank by Phone, etc.), ensure that the T / P (Tone / Pulse) switch on the bottom
of the base unit is set to the Pulse position.
2.
Press the TONE ( * ) button once to switch from Pulse to Tone dialing temporarily. Pulse
dialing mode resumes when the call is ended.
PAUSE FUNCTION
•
In some cases, such as PABX or long distance service, a pause may be needed in the
dialing sequence. Pressing the handset RE / PA button inserts a four-second delay
between dialed numbers.
FLASH FUNCTION
•
Used to access custom calling features such as Call Waiting or Three-Way Calling
provided by your local phone company. Flash can also be used to restore a dial tone to
make a new call.
CHANNEL SELECTION (40 Channels)
A.
AUTO CHANNEL SCAN
•
When you place or receive a call and handset TALK button is pressed, the
GX2401c
auto-scans for a clear channel.
•
Once it finds a clear channel, the handset LCD Display
symbol will
light steadily.
B.
MANUAL CHANNEL SCAN
•
If the existing channel becomes noisy or starts having
interference, you can either move closer to the base unit or
press the SCAN / PRG button on the handset until better (Figure 12)
reception is found.
OUT OF RANGE WARNING
•
The handset and base unit communicate up to a certain maximum range. The distance
can be affected by weather, power lines, or even other cordless telephones.
•
If you far away from the base unit, the handset beeps and
"OUT OF RANGE" is shown on the LCD display to warn you
that the background noise level is too high for proper
communication between the handset and the base unit.
•
When you hear this sound and see the "OUT OF RANGE" display, you should move
817-456-7890
TALK
OUT OF RANGE