Blagdon Pump B75 Metallic - Manual (Page 3)

Blagdon Pump • A Unit of IDEX Corporation • R79 Shannon Industrial Estate • Co Clare, Ireland • Tel: +353 (0) 61 471933 • Fax: +353 (0) 61 475046
www.blagdonpump.com • E-Mail: [email protected]
x75mdl1sm-rev0812
Page 1
Air Operated Double Diaphragm Pump 6/05 Page 1
Buna N purpose, oil-resistant. Shows good solvent, oil, water and hydraulic fluid resistance.
Should not be used with highly polar solvents like acetone and MEK, ozone, chlorinated
190°F -10°F
hydrocarbons and nitro hyrdrocarbons. 88°C -23°C
EPDM Shows very good water and chemical resistance. Has poor resistance to oil and solvents, 280°F -40°F
but is fair in ketones and alcohols. 138°C -40°C
Neoprene All purpose. Resistant to vegetable oil. Generally not affected by moderate chemicals,
fats, greases and many oils and solvents. Generally attacked by strong oxidizing acids, ketones,
200°F -10°F
esters, nitro hydrocarbons and chlorinated aromatic hydrocarbons. 93°C -23°C
Santoprene ® Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex 275°F -40°F
life. Excellent abrasion resistance. 135°C -40°C
Virgin PTFE Chemically inert, virtually impervious. Very few chemicals are known to react chemically with
PTFE: molten alkali metals, turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as
220°F -35°F
chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at elevated temperatures. 104°C -37°C
Viton ® Shows good resistance to a wide range of oils and solvents; especially all aliphatic, aromatic
and halogenated hydrocarbons, acids, animal and vegetable oils. Hot water or hot aqueous solutions 350°F -40°F
(over 70°F) will attack Viton. 177°C -40°C
Polypropylene 180°F 32°F
82°C 0°C
Materials
Maximum Minimum
Operating Temperatures
INTAKE/DISCHARGE PIPE SIZE
3" BSPT (tapered) or
3" BSP Parallel (internal)
CAPACITY
0 to 196 UK gallons per minute
(0 to 889 liters per minute)
AIR VALVE
No-lube, no-stall
design
SOLIDS-HANDLING
Up to .25 in. (6mm)
HEADS UP TO
125 psi or 289 ft. of water
(8.6 Kg/cm 2 or 86 meters)
DISPLACEMENT/STROKE
.78 UK Gallons / 3.56 liters
CAUTION! Operating temperature limitations are as follows:
X75 X75 X75 X75 X75
Metallic Metallic Metallic Metallic Metallic
Design Level 1 Design Level 1 Design Level 1 Design Level 1 Design Level 1
Ball V Ball V Ball V Ball V Ball Valve alve alve alve alve
Air-Powered
Double-Diaphragm Pump
ENGINEERING, PERFORMANCE
& CONSTRUCTION DATA
Nitrile
FKM
Conductive HDPE
3” BSPT (tapered),
3” BSP Parallel (internal),
or 3” NPT