Alpine Multimedia ManagerTM PXI-H990 - Manual (Page 8)

7
-EN
Installation
• Mounting the base unit
1. Decide on the installation location.
• The trunk, etc., is the best place.
2. Mark the positions of the mounting screws at the chosen location.
3. Drill 3 mm (1/8”) holes or smaller.
WARNING: When making holes, be careful not to damage pipes, tanks, electric wires, etc.
Doing so could lead to accidents or fire.
4. Securely mount the unit using the four included tapping screws (M4 x 14).
Tapping screws (M4 x 14)