Htck3623s, General pump, Screw tightening calibration – General Pump HTCK3623S User Manual
Page 16
GENERAL PUMP
A member of the Interpump Group
HTCK3623S
Page 16
Ref 300935 Rev.A
09-13
3. SCREW TIGHTENING CALIBRATION
Description
Exploded Drawing
Position #
Tightening Torque
Cover fixing screw
9
7.4 ft.lbs. (10 Nm)
Piston fixing screw
28
14.8 ft.lbs (20 Nm)
Connecting rod cap fixing screw
16
22.1 ft.lbs (30 Nm)*
Head fixing screw
39
29.5 ft.lbs (40 Nm)**
Valve cover fixing screws
40
59.0 ft.lbs (80 Nm)***
Oil discharge plug
11
29.5 ft.lbs (40 Nm)
G1” outlet plug
31
73.8 ft.lbs (100 Nm)
G1-1/2” suction plug
29
88.5 ft.lbs (120 Nm)
Type “A” flange fixing screw
66
16.2 ft.lbs (22 Nm)
* The connecting rod cap fixing screws must be tightened
respecting the stages indicated on page 7
** The head fixing screws must be tightened with a
torque wrench, lubricating the underhead, respecting the order in fig. 24
*** The valve cover fixing screws must be tightened with a torque wrench,
lubricating the underhead, respecting the order in fig. 24