General pump – General Pump T16A-18A-20A-22A User Manual
Page 12
GENERAL PUMP
A member of the Interpump Group
KT16A/18A/20A/22A SERIES
Disassemble the suction and outlet valve units, screwing a sufficiently long M8 screw in such a way as to be
able to reach the valve plate and extract the valve guide from the seat, 1, fig. 22. If the M8 threaded holes
should not be present on the valve guide, dismantling can be easily carried out by leveraging with simple
tools (fig. 23).
Page 12
Ref 300942 Rev.A
03-14
If the suction valve seats remain stuck on the head (for example scaling due to prolonged
pump activity), operate as follows:
For KT16A/18A use tools p/n F26019400, F27513700 and F27513400 (fig. 23, 24)
For KT20A/22A use tools p/n F26019400, F27513500 and F27513400 (fig. 24, 24A)
Note: before extracting from the seats, always unscrew the handle #F27513400