General pump, Screw calibration – General Pump T16A-18A-20A-22A User Manual
Page 18
GENERAL PUMP
A member of the Interpump Group
KT16A/18A/20A/22A SERIES
3. SCREW CALIBRATION
Screws are to be fastened exclusively using a torque wrench.
Description
Exploded View
Position
(From Owner’s Manual)
Fastening
Ft. Lbs.
Fastening
Nm
Cover Fixing Screw
9
7.4
10
Oil Discharge Plug
11
30
40
Piston Fixing Screw
27
14.8
20
Con-rod Fixing Screw
18
22.1*
30*
Valve Cover Fixing Screw
45
132.8***
180***
Head Fixing Screw
47
59**
80**
2nd PTO Flange Fixing Screw
96
107****
145****
* The con-rod cap fixing screws must be tightened at the same time respecting the
phases indicated on page 7.
** The head fixing screws (exploded position 47) must be tightened with a torque wrench respecting
the sequence shown in the diagram in fig. 34.
*** The valve cover fixing screws (exploded position 45 must be tightened with a torqe wrench
respecting the order shown in the iagram in fig. 34.
****To fix the 2nd PTO flange, use Loctite 243 blue, p/n F12006400.
Page 18
Ref 300942 Rev.A
03-14