Sk series – General Pump SK Repair Manual User Manual
Page 15
Advertising
GENERAL PUMP
A member of the Interpump Group
SK SERIES
Complete the disassembly of the mechanical part by removing the oil level lights, the eyebolts and the 90
o
quick-fit connection.
2.1.2 Assembly of Mechanical Parts
Proceed with assembly following the reverse order indicated in point 2.1.1. The proper sequence is as
follows:
Attach the two oil level lights, the two oil drain plugs and the 90
o
quick-fit connection (1, 2 and 3, fig. 48).
Page 15
To separate the stem from the piston head, it is necessary to unscrew the hexagonal-head M10 screw using
a no. 17 socket wrench (1, fig. 47).
Advertising