Sk series – General Pump SK Repair Manual User Manual
Page 6
Advertising
GENERAL PUMP
A member of the Interpump Group
SK SERIES
Page 6
Unscrew the attachment screws of the shaft end cover (1, fig. 9) and slip the cover off the PTO shaft
Unscrew the casing cover attachment screws (1, fig. 10) and remove it. Slip off the O-ring and replace if needed.
Now remove the two bearing covers by unscrewing the screws (1, fig. 11). To help with their removal, use 2
M8 grub screws (1, fig. 12) as extractors. Slip off the O-ring and replace if necessary.
Advertising