Acer AT4220A - Manual (Page 15)

English
15
PBP
1a. Press the ACTIVE key to toggle between PBP screens.
TV AV COMPONENT PC
1b. Press the TV, AV, COMPONENT or PC keys, number keys or
CH up or down to change the content of the active screen.
2. Press the SWAP key to change the content between the
primary and the PBP screen.
PBP PBP
Swap
POP
1a. Press the ACTIVE key to toggle between POP screens.
1b. Press the number keys or CH up or down to change the TV
channel on the active screen.
2. Press the SIZE/MODE key to access the 1 + 5 or 1+12 picture-
on-picture mode as shown in the image.
POP POP POP
POP
POP
POP POP POP POP
POP POP POP POP
POP POP
POP POP
1+5 1+12
1. In PIP and PBP, the VGA and DVI sources only support input up to 1360x768 pixels at 60 Hz. For resolutions higher
than this, "Out of Range" will be displayed.
2. The POP can only support 1+12 when the main screen source is HD content or in VGA mode.
Acer.TV.US.indb 15 6/22/2006 11:25:20 AM