Re-scan for channels – Acer AT4220A User Manual
Page 21
Advertising
English
21
Scanning for channels
1
Press the MENU key on the remote control to bring up the OSD.
2
Use the directional keys to navigate and select
Channel Management.
3
Highlight Auto Scan. Then, select Start
and press OK to begin.
4
Select OK and press MENU to exit.
Re-scan for channels
The first time you completed the setup wizard, all available channels were listed. If you need to re-scan for new channels, please
follow the steps below:
Acer.TV.US.indb 21
6/22/2006 11:25:27 AM
Advertising