Hauler Racks SERVICE BODY ‘B’ MOUNT RACKS - Manual (Page 5)

3. Set middle crossbar assembly in place.
The middle crossbar assembly is the ribbed rectangle extrusion with a slotted bottom with ‘H’ brackets
attached to each end and ‘T’ brackets attached to the slotted bottom.
Orientate the crossbar so the ribbed bottom is facing down.
Position the middle crossbar assembly on the front side rails forward of the 5” bracket and about
halfway between the 5” bracket and the next support bracket. The middle crossbar assembly will be
secured in place after the final adjustments on the vehicle.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 5 of 15 WWW.HAULERRACKS.COM