Hauler Racks Universal Steel Truck/Cap Rack (STC3-1) User Manual
Page 12
12 of 16
HAULER RACKS, INC.
7109 31
st
Avenue North
Minneapolis, MN 55427-2848
WWW.HAULERRACKS.COM
Toll Free: 1-800-843-5445
Phone: 763-546-5620
Fax: 763-546-0933
Step 9 Rack placement on bed
CAP PLATES
If using a cap plates, bolt the plate to the leg using (2) 3/8”-16 x 1-1/4 bolts, (2) flat washer, (2) split lock washers and
(2) 3/8-16 nuts. Repeat for remaining plates and legs.
With an assistant place on the vehicle and align to desired position.
Using the cap plate side bolt hole as a guide, drill a 3/8” hole through the truck bed side rail wall.
Apply a small bead of silicone around the drilled hole.
Bolt the plate to the truck bed with a 3/8”-16 x 1-1/4” bolt, flat washer, split lock washer and 3/8”-16 nut. Repeat for
remaining cap plates.
TRUCK BED MOUNT
Drill out the holes marked on the tape with a 3/8” drill and remove tape from the truck bed. Apply a small bead of
silicone around the drilled holes.
With an assistant, lift the rack and place on the bed of the truck and align the bolt holes in the leg feet with the holes
drilled in the bed.
Loosely secure the legs to the bed with (2) 3/8”-16 x 1-1/4” bolts, (2) flat washers, (2) split lock washers and (2) 3/8”-
16 nuts.