Enabling redundant hardware, Web agent procedure, Enabling redundant hardware -6 – Avaya 580 User Manual
Page 306
10-6
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 10
Enabling Redundant Hardware
Web Agent
Procedure
To enable redundant hardware using the Web Agent:
1. In the navigation pane, expand the System > Configuration folders, and
then click Switch Fabric.
The Switch Fabric Status Web page is displayed in the content pane.
See
.
Figure 10-3. Switch Fabric Status Web Page
2. Select Yes from the Configure redundant Hardware field pull-down
menu.
3. Click APPLY. The Switch Fabric Status should now show the redundant
controller and element Available. (
4. Save the configuration.
* Note: If you disable and then reenable redundant hardware after the
Primary controller fails, the state of the failed controller
changes from Failed to Available.