Avaya 580 - Manual (Page 361)

Document No. 10-300077, Issue 2 12-33
Configuring IP Routing
Figure 12-16. IGMP Interfaces Web page
2. See Table 12-8 to modify an IGMP interface.
3. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Table 12-8. IGMP Interface Parameters
Parameter Allows you to...
Select Select the interface to be modified.
Interface Displays the IP interface that is configured with IGMP.
IP Address Displays the IP address associated with this interface.
Note: You cannot configure this field from the IGMP
Configuration Web page.
IP Address Mask Displays the subnet mask associated with this interface.
Note: You cannot configure this field from the IGMP
Configuration Web page.
IGMP Version Select the IGMP Version (1.0 or 2.0) to be associated
with the IGMP interface.
Maximum Groups Enter the number of IGMP Groups that can be active on
this interface. The default setting is 32. The valid range
for this field is 1 to 7,000.
1 of 2