Before you begin installation – Lanair 215 Gallon Tank With Bypass Regulator User Manual

Page 2

Advertising
background image

®

BEFORE YOU BEGIN INSTALLATION...

IMPORTANT
Read and understand this manual completely before beginning installation.

s This tank is for commercial and industrial use only. This unit is not intended for residential

use.

s Install Heater/Tank combination in an area that is protected from fork lift and motor vehicle

traffic.

s Bolt tank to floor before you fill the tank or install the heater.

s Secure the heater to a permanent structure after installation.

s Install the heater according to the printed information in your owners manual.

s Installation of this unit must be made in accordance with state and local codes or

authorities having jurisdiction over environmental control, fuel, fire and electrical safety.

s Read and familiarize yourself with these instructions and associated photos, diagrams and illus-

trations before beginning installation or operation. These instructions should be followed
closely, to achieve the best possible results.

If you have questions or concerns at any time during the installation, stop the installation and
contact a Lanair Service Representative.

s Check to make sure you have all the required components needed for proper installation and

operation.

s Check each component for visible damage. If you find a damaged component, contact a Lanair

Service Representative for a replacement. Do not install broken or damaged parts.

s Read and understand the warranty. Fill out the enclosed warranty card and return within 10

days of purchase.

s Clean and de-burr all pipe connections prior to use. Loose filings and burrs can clog the nozzle.

QUESTIONS?... Contact Customer Service at 1-800-753-1601 M-F 8:00 am- 4:30 pm CST

2

s Install Heater/Tank combination in an area that is protected from fork lift and motor

vehicle traffic.

s Bolt tank to floor before you fill the tank or install the heater.
s Secure the heater to a permanent structure after installation.
s Install the heater according to the printed information in your owners manual.

!

Advertising