Lock, Network, Information – LOCKSTATE LS-90 Operation Guide User Manual
Page 15
PG
14
PG
14
NETWORK
Refer to your NETWORK system manual.
INFORMATION
Displays info and interactive screens from a network source. Refer to your
NETWORK system manual.
LOCK
The
LS-90 has 2 lock features. These control the users ability to change the
temperature and other settings of the
LS-90.
To lock and/or control the ability to change the
LS-90:
1. Press MENU and then touch
LOCK icon in the lower right of
the screen.
2. Select the desired LOCK feature by touching the function:
PARTIAL: Limits the user to temporary override the
LS-90 target
temp. The override is limited to ±9
o
F (±5
o
C). To change this range
touch “RANGE +/-“ and using the +/- buttons to adjust up and down.
FULL: No changes can be made.
3. Press HOME to return to the Home screen.
Once LOCKED the
LS-90 will respond to a limited set of manual commands.
To UNLOCK :
1. Press MENU, touch and hold the LOCK icon for 10 seconds.
2. Touch LOCK OFF
3. Press HOME to return to the Home screen.
1 2 : 3 0 p m W E D 7 4
.
Range +/-
LOCK
LOCK OFF
FULL
PARTIAL
4F